Cisco Systems Network Card 5525XW750 User Manual

QUICK START GUIDE  
Cisco ASA 5500-X Series  
ASA 5512-X, ASA 5515-X, ASA 5525-X, ASA 5545-X, and ASA 5555-X  
Regulatory Compliance and Safety Information  
Read the safety warnings in the Regulatory Compliance and Safety Information (RCSI),  
and follow proper safety procedures when performing the steps in this guide. See  
http://www.cisco.com/go/asadocs for links to the RCSI and other documents.  
 
ASA 5545-X and ASA 5555-X  
2
1
4
3
Software CD  
Quick Start  
Guide  
W
e
5
lcome Card  
6
ASA 5545-X or ASA 5555-X Chassis  
(one power supply shown)  
Yellow Ethernet Cable  
1
2
Power Cord  
Blue Console Cable PC Terminal Adapter  
Documentation and Software CD  
3
5
4
6
Power Cord Retainer  
Not shown: Slide Rail Kit  
3
 
2 Powering On the ASA  
Step 1 Attach the power cable to the ASA and connect it to an electrical outlet.  
Step 2 Power on the ASA.  
Step 3 Check the Power LED on the front of the ASA; if it is solid green, the device is powered on.  
Step 4 Check the Status LED on the front of the ASA; after it is solid green, the system has passed  
power-on diagnostics.  
4
 
 
3 Connecting Interface Cables and Verifying Connectivity  
Step 1 Connect a management PC to the Management 0/0 interface for use with the Adaptive  
Security Device Manager (ASDM).You can connect the PC directly with an Ethernet cable, or  
connect the PC and the ASA to the same management network. Make sure the PC is  
configured to obtain an IP address using DHCP.  
If you want to use the CLI, connect your PC to the console port, and see the CLI configuration  
guide for more information.  
Step 2 Connect your networks to the appropriate ports.  
Management PC  
1
2
Secured  
Network  
Unsecured  
Network  
(Optional) I/O Card. If you have a  
fiber I/O card, you need to use SFP  
modules (not included). See the  
hardware installation guide for  
information.  
Management 0/0 interface (RJ-45)  
1
2
Step 3 Check the LINK/ACT indicators to verify interface connectivity.  
5
 
 
4 Launching ASDM  
The ASA ships with a default configuration that enables ASDM connectivity to the Management 0/0  
interface. Using ASDM, you can use wizards to configure basic and advanced features. ASDM is a  
graphical user interface that allows you to manage the ASA from any location by using a web browser.  
See the ASDM release notes on Cisco.com for the requirements to run ASDM.  
Step 1 On the PC connected to the ASA, launch a web browser.  
Step 2 In the Address field, enter the following URL: https://192.168.1.1/admin. The Cisco ASDM  
web page appears.  
Step 3 Click Run Startup Wizard.  
Step 4 Accept any certificates according to the dialog boxes that appear. The Cisco ASDM-IDM  
Launcher appears.  
Step 5 Leave the username and password fields empty, and click OK. The main ASDM window  
appears and the Startup Wizard opens.  
6
 
 
5 Running the Startup Wizard  
Run the Startup Wizard to modify the default configuration so that you can customize the security  
policy to suit your deployment. Using the startup wizard, you can set the following:  
Hostname  
Static routes  
Domain name  
Administrative passwords  
Interfaces  
DHCP server  
Network address translation rules  
and more...  
IP addresses  
Step 1 If the wizard is not already running, in the main ASDM window, choose Wizards > Startup  
Wizard.  
Step 2 Follow the instructions in the Startup Wizard to configure your ASA.  
Step 3 While running the wizard, you can accept the default settings or change them as required. (For  
information about any wizard field, click Help.)  
7
 
 
6 (Optional) Allowing Access to Public Servers Behind the  
ASA  
The Public Server pane automatically configures the security policy to make an inside server accessible  
from the Internet. As a business owner, you might have internal network services, such as a web and  
FTP server, that need to be available to an outside user. You can place these services on a separate  
network behind the ASA, called a demilitarized zone (DMZ). By placing the public servers on the  
DMZ, any attacks launched against the public servers do not affect your inside networks.  
Step 1 In the main ASDM window, choose Configuration > Firewall > Public Servers. The Public  
Server pane appears.  
Step 2 Click Add, then enter the public server settings in the Add Public Server dialog box. (For  
information about any field, click Help.)  
Step 3 Click OK. The server appears in the list.  
8
 
7 (Optional) Running VPN Wizards  
You can configure VPN using the following wizards:  
Site-to-Site VPN Wizard—Creates an IPsec site-to-site tunnel between two ASAs.  
AnyConnect VPN Wizard—Configures SSL VPN remote access for the Cisco AnyConnect VPN  
client. AnyConnect provides secure SSL connections to the ASA for remote users with full VPN  
tunneling to corporate resources. The ASA policy can be configured to download the AnyConnect  
client to remote users when they initially connect via a browser. With AnyConnect 3.0 and later,  
the client can run either the SSL or IPsec IKEv2 VPN protocol.  
Clientless SSL VPN Wizard—Configures clientless SSL VPN remote access for a browser.  
Clientless, browser-based SSL VPN lets users establish a secure, remote-access VPN tunnel to the  
ASA using a web browser. After authentication, users access a portal page and can access specific,  
supported internal resources. The network administrator provides access to resources by users on  
a group basis. ACLs can be applied to restrict or allow access to specific corporate resources.  
IPsec (IKEv1) Remote Access VPN Wizard—Configures IPsec VPN remote access for the Cisco  
IPsec client.  
9
 
 
Step 1 In the main ASDM window, choose Wizards > VPN Wizards, then choose one of the  
following:  
Site-to-Site VPN Wizard  
AnyConnect VPN Wizard  
Clientless VPN Wizard  
IPsec (IKEv1) Remote Access VPN Wizard  
Step 2 Follow the wizard instructions. (For information about any wizard field, click Help.)  
10  
 
8 (Optional) Running Other Wizards in ASDM  
You can optionally run the following additional wizards in ASDM:  
High Availability and Scalability Wizard  
Configure active/active or active/standby failover, or VPN cluster load balancing.  
Unified Communications Wizard  
Configure a proxy on the ASA for remote access or business-to-business communications. (Special  
licenses may apply. See the CLI configuration guide for information about ASA licensing.)  
Packet Capture Wizard  
Configure and run packet capture. The wizard will run one packet capture on each of the ingress  
and egress interfaces. After capturing packets, you can save the packet captures to your PC for  
examination and replay in the packet analyzer.  
9 Advanced Configuration  
To continue configuring your ASA, see the documents available for your software version at:  
11  
 
   
Americas Headquarters  
Cisco Systems, Inc.  
San Jose, CA  
Asia Pacific Headquarters  
Cisco Systems (USA) Pte. Ltd.  
Singapore  
Europe Headquarters  
Cisco Systems International BV Amsterdam,  
The Netherlands  
Cisco has more than 200 offices worldwide. Addresses, phone numbers, and fax numbers are listed on the  
Cisco Website at www.cisco.com/go/offices.  
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of  
Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners.  
The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R)  
© 2011 Cisco Systems, Inc. All rights reserved.  
Printed in the USA on recycled paper containing 10% postconsumer waste.  
78-20618-01  
 

Black Box TV Converter Box AC215A User Manual
Blodgett Oven 1000 User Manual
Bosch Appliances Home Security System MX938I User Manual
Braun Blender MR 740 CC User Manual
Bravetti Cooktop KC241B User Manual
Cables to Go Network Cables 39986 User Manual
Canon Fax Machine H12295 User Manual
Casio Musical Instrument WK3200 User Manual
Chamberlain Switch GCU User Manual
Chicago Electric Saw Cookerhoods User Manual