Addonics Technologies Computer Drive ADSA3GPX8 4E User Manual |
User Guide
4 Port eSATA RAID5/JBOD
PCI-E 8x Controller
T E C H N O L O G I E S
(ADSA3GPX8-4E)
BIOS Jumper (J4)
Hard Drive Activity LED
Jumper Connections
Fan
eSATA Ports
BIOS Jumper (J4)
Enable BIOS (1-2) – RAID firmware is active
Disable BIOS (2-3) – Base firmware is active
By default, the BIOS jumper is set to enable BIOS (1-2) for the ADSA3GPX8-4E. This means that when
you boot into a system, after POST, the RAID BIOS of the controller card with the attach devices shows
up. The RAID driver needs to be installed.
If the BIOS jumper is set to disable BIOS (2-3) when you boot into a system, after POST, the RAID BIOS
of the controller card does NOT show up. The BASE driver needs to be installed.
v4.1.11
Technical Support
If you need any assistance to get your unit functioning properly, please have your
product information ready and contact Addonics Technical Support at:
Hours: 8:30 am - 6:00 pm PST
Phone: 408-453-6212
|
3Com Gas Grill PE420N User Manual
Acoustic Research Headphones ARE05 User Manual
ADC Clothes Dryer HBG76 User Manual
Agilent Technologies Work Light 8163A User Manual
Agri Fab Lawn Sweeper 45 0456 User Manual
Alcatel Lucent Switch CAR2888080520 User Manual
Amana Clothes Dryer LE4217W L2 User Manual
Axis Communications Security Camera T95A00 User Manual
Axor Plumbing Product 04170XX0 User Manual
Behringer Musical Instrument Amplifier BVT4500H User Manual